Shoes Card

What you need:

• Black folded deckle edge A5 card
• Black Peel Off Stickers (shoes & happy birthday)
• 12x12 paper black & white daisy
• Black and white card or paper
• White ribbon
• Self adhesive pearl gem stones
• Small and regular daisy punch
• Tag punch
• P.V.A. Glue
• 3D foam pads
• Double sided tape or glue stick

What to do:

1. Start by cutting a piece of the daisy paper to cover approximately half of the front of the card (75 x 195mm). Stick this to the left side of the card using double sided tape or a strong glue stick. Cut another piece of white card to roughly the same size and stick this alongside the daisy paper. It's best to use a guillotine or knife when cutting to ensure the two pieces line up neatly.
2. Using the remainder of the daisy paper, stick three shoe peel offs onto it and carefully cut each one out. Flip the shoes over and cover the back with the glue stick then press into place on the white strip of the card.
3. Punch out six regular size daisies from the plain black card. Take two of the daisies and stick them together in the middle with a dot of PVA glue making sure the petals are alternating. Glue the buttons to the front of the daisies then stick each flower onto the white base card. Once the glue is dry lift the edges of the petals slightly so that they curl up a little giving a more 3D effect.
4. To make the tag, punch out the shape from thin white card. Punch out two small daisies from the black card and use a little PVA dot in the middle to stick them to the corners of the tag. Take two of the gem stones and stick them on the daisies. Use magic tape to lift off the happy birthday peel off in a straight line and apply it to the tag diagonally. Finally tie a piece of ribbon through the top of the tag leaving pleanty of ribbon to trail off.
5. Cut a square of 3D foam and stick to the back of the tag then fix the tag in place on the black daisy paper. Trim the ends of the ribbon to fit the card as needed.